Performance -30°C and standard EN397:2012 effective from 03/2016 production batches.
The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :
“BASEBALL CAP” SHAPE SAFETY HELMET
BASEBALL DIAMOND V
ABS safety helmet. Innovative “baseball cap” shape to improve vision when looking up. Also tested for front back wearing, to reduce encumbrance. Textile cradle: 3 textile straps with 8 fixing points. Foam sweat band. Innovative button adjustment “colour to colour” for head sizes 53/63 cm. 2 possible positions of the headband (top/low) for a better comfort. Electrical insulation up to 1 000 V.A.C. or 1 500 V.D.C.
Performance -30°C and standard EN397:2012 effective from 03/2016 production batches.
ABS
| Reference |
pcb |
Colour |
Size |
| DIAM5BCFL |
20 |
White |
Adjustable |
| DIAM5BLFL |
20 |
Blue |
Adjustable |
| DIAM5GRJAFL |
20 |
Grey-Yellow |
Adjustable |
| DIAM5JAFL |
20 |
Yellow |
Adjustable |
| DIAM5NO |
20 |
Black |
Adjustable |
| DIAM5ORFL |
20 |
Orange |
Adjustable |
| DIAM5ROFL |
20 |
Red |
Adjustable |
| DIAM5VEFL |
20 |
Green |
Adjustable |
EN397:2012 + A1:2012 Protective helmets for industry - MM Molten metal spray
- LD Lateral deformation
- Standard temperatures - -10°C / +50°C
- Very low temperature - -20°C / +50°C
- -30°C +50°C Very low temperature - -30°C / +50°C
- Very high temperature - +150°C / -30°C
- 440 VAC Electric insulation
Protective helmets for industry.
MANDATORY
– Impact*: force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height. The impact energy of the helmet at the end of the test is 49 J.
– Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull.
– Flammability: the helmet should not burn with flame emission more than 5 seconds after removal of the flame.
* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C
OPTIONAL
In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C or -30°C.
Protects against lateral compression. The maximum deformation of the helmet should be ≤ 40 mm.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC
Resistance to molten metal splashes
EN50365:2002 Electrically insulating helmets for use on low voltage installations - 0 Casques électriquement isolants - Classe 0
Electrical insulation helmets for use in low voltage environment.
MANDATORY
Electrically insulating helmets for use near energized equipment not exceeding 1000 VAC or 1500 VDC (appliance class 0).
Used simultaneously with other electrically insulating protective equipment, these helmets prevent dangerous currents passing through to the person’s head.
These optional electrical insulation tests are more stringent than the EN397 and they complement them. (2 triangle marking, Class 0).
