The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :
COMPLETE FORESTER TYPE HELMET
Forester’s type helmet consisting of: QUARTZ UP III safety helmet: UV-resistant high density polypropylene. Polyamide cradle: 3 textile bands with 8 fixing points. SUZUKA2 ear defenders. VISOR HOLDER faceshield holder. VISORG gauze visor. Plastic shell packaging.
Helmet: U-V resistant high density polypropylene
Ear defender : Flexible plastic material arm. Ear protection : synthetic foam.
Visor : Steel – aluminium
Storage bag included
| Reference |
pcb |
Colour |
Size |
| FORE2OR |
10 |
Orange |
Adjustable |
EN397:2012 + A1:2012 Protective helmets for industry - MM Molten metal spray
- Lateral deformation
- Standard temperatures - -10°C / +50°C
- Very low temperature - -20°C / +50°C
- +50°C -30°C Very low temperature - -30°C / +50°C
- Very high temperature - +150°C / -30°C
- 440VAC Electric insulation
Protective helmets for industry.
MANDATORY
– Impact*: force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height. The impact energy of the helmet at the end of the test is 49 J.
– Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull.
– Flammability: the helmet should not burn with flame emission more than 5 seconds after removal of the flame.
* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C
OPTIONAL
In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C or -30°C.
Protects against lateral compression. The maximum deformation of the helmet should be ≤ 40 mm.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC
Resistance to molten metal splashes
EN50365:2002 Electrically insulating helmets for use on low voltage installations - 0 Casques électriquement isolants - Classe 0
Electrical insulation helmets for use in low voltage environment.
MANDATORY
Electrically insulating helmets for use near energized equipment not exceeding 1000 VAC or 1500 VDC (appliance class 0).
Used simultaneously with other electrically insulating protective equipment, these helmets prevent dangerous currents passing through to the person’s head.
These optional electrical insulation tests are more stringent than the EN397 and they complement them. (2 triangle marking, Class 0).
EN1731 Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat. - F Oculars marking
- F Frame marking
Material specifications, design, performance and test methods for eye and face mesh type protective, for professional use.
EN352-3 Earing protection : for safety helmet - SNR 27 dB Standard noise reduction
- H29 High frequency attenuation
- M 25 Medium frequency attenuation
- L 18 Low frequency attenuation
The adjustable head defenders for the safety helmets.
