» Products » Dplat50

Dplat50

6igfr

Colour

Green

Size

0709

The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :

6IGFR

 

LATEX ON INTERLOCK COTTON LINING GLOVE – LENGTH: 30 CM

Latex on interlock cotton lining. Rough textured palm and back. Length: 30 cm. Thickness: 1,80 mm.

Support : interlock cotton.

Coating : natural latex

  • Agriculture / Green areas
  • Heavy industry
  • Second work / craftsman
  • Biological chemical particles
  • Heat
  • Wearing
  • Rough-textured palm :
    • Excellent grip

    Reference pcb Colour Size
    DPLAT5007 60 Green 07
    DPLAT5009 60 Green 09
  • EN420:2003 General requirements
    • 5 Dexterity (from 1 to 5)
    • Conform to harmlessness (pH, chrome VI levels, etc…). • Conform to the size charts (see chart on below). • Pass the dexterity test. • Conform to the labelling, information and identification instructions.
  • EN388:2003 Protective gloves against mechanical Risks (Levels obtained on the palm)
    • 3 Resistance to abrasion (from 1 to 4)
    • 1 Resistance to cutting (from 1 to 5)
    • 2 Resistance to tear (from 1 to 4)
    • 1 Resistance to puncture (1 to 4)
    The EN388 standard applies to all types of protective gloves with respect to physical and mechanical aggression from abrasion, cutting from slicing, perforation and tearing. ABRASION RESISTANCE (1 à 4): Number of cycles required to damage the sample at constant speed. RESISTANCE TO CUTTING WITH A BLADE (1 à 5): Number of cycles required to cut the sample at constant speed. RESISTANCE TO TEARING (1 à 4): Maximum force required to tear the sample. RESISTANCE TO PERFORATION (1 à 4): Force required to pierce the sample with a standardized punch.
  • EN374-3:2003 Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
    • AKL Resistant gloves to permeation by chemicals, tested according to EN374-3
    • 6 > 480 mn Méthanol (A) CAS 67-56-1
    • Acetone (B) CAS 67-64-1
    • Acetonitrile (C) CAS 75-05-8
    • Dichloromethane (D) CAS 75-09-2
    • Carbon disulfide (E) CAS 75-15-0
    • Toluene (F) CAS 108-88-3
    • Diethylamine (G) CAS109-89-7
    • Tetrahydrofuran (H) CAS 109-99-9
    • Ethyl acetate (I) CAS 141-78-6
    • n-Heptane (J) CAS 142-85-5
    • 6 > 480 mn Caustic soda 40% (K) CAS 1310-73-2
    • 2 > 30 mn Sulphuric acid 96 % (L ) CAS 7664-93-9
    Permeation (tested as per standard EN374-3): Process by which a chemical product diffuses through the material of a protective glove, at the molecular scale. A glove is considered resistant to chemical products if it obtains a performance index to permeation at least equal to 2 for three test chemical products included in the following list of chemical products:
  • EN407:2004 Protective gloves against Heat & Fire risks (X = Unrealized test)
    • x Resistance to flammability (from 1 to 4)
    • 1 Resistance to contact heat (from 1 to 4)
    • x Resistance to convective heat (from 1 to 4)
    • x Resistance to radiant heat (from 1 to 4)
    • x Resistance to small projections of liquid metal (from 1 to 4)
    • x Resistance to large projections of molten metal (from 1 to 4)
    The EN407 standard specifies the test methods, the general requirements, the thermal performance and the labelling of gloves to protect from heat and fire. It applies to all gloves which must protect hands from heat and/or flames in any one or several of the following forms: fire, contact heat, convective heat, radiating heat, small spray of molten metal or large spray of melting metal. RESISTANCE TO FLAMMABILITY (1 to 4): Time during which the material remains lighted and continues to be consumed after the ignition source has been eliminated. RESISTANCE TO CONTACT HEAT (1 to 4): Temperature (within the range of 100°C to 500°C) at which the person wearing the gloves will not feel any pain (for a period of at least 15 seconds). RESISTANCE TO CONVECTIVE HEAT (1 to 4): Time during which the glove is able to delay the transfer of the heat of a flame. RESISTANCE TO RADIATING HEAT (1 to 4): Time required to raise to a given temperature level. RESISTANCE TO SMALL MELTING METAL SPRAY (1 to 4): Amount of spray required to raise the glove to a certain temperature. RESISTANCE TO LARGE MELTING METAL SPRAY (1 to 4): Amount of spray required to cause damage.