The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :
LUMBERJACK DUNGAREES – CUT RESISTANT COMPOUND LINING
Cut resistant Bib and Brace. Zip opening leg hem with preformed knees. Adjustable elasticated waist with internal buttons to both sides. Adjustable elasticated braces. 5 pockets including 1 ruler.
Twill 60% cotton 40% polyester 290 g/m².
Polyester mesh lining with a cut resistant compound.
Agriculture / Green areas 
Cutting / Perforation 
Buttock reinforcement
Back reinforcement
MELEZE 3 - ERABLE 3
| Reference |
pcb |
Colour |
Size |
| ERAB3VETM |
5 |
Green-Orange |
M |
| ERAB3VEGT |
5 |
Green-Orange |
L |
| ERAB3VEXG |
5 |
Green-Orange |
XL |
| ERAB3VEXX |
5 |
Green-Orange |
XXL |
EN340:2003 General requirements Reference standard, not for use alone, but only in association with another standard containing the protection performance requirements.
This standard specifies general performance requirements for ergonomics, innocuousness, size designation, durability, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing.
EN381-5:1995 Protective clothing for users of hand-held chainsaws - A Type of the leg-shields (Type A / or Type B / or Type C )
- 1 Speed of the chain : class 0=16m/s, class 1=20m/s, class 2=24m/s, class 3=28m/s
This standard specifies the requirements to be used to assess the resistance of protective clothing to cutting by hand-held chainsaws. It is divided into several parts:
– EN381-5: Specifies the requirements for leg protectors.
– EN381-7: Specifies the requirements for protective gloves.
– EN381-9: Specifies the requirements for protective gaiters.
– EN381-11: Specifies the requirements for upper body protectors.
The cut tests are conducted using 4 chain speeds:
– Class 0: 16 m/s
– Class 1: 20 m/s
– Class 2: 24 m/s
– Class 3: 28 m/s
The protective zone on leg protectors is coded using three letters A, B or C, corresponding to the coverage surface of the cut-proof material (Type A, Type B or Type C).
