“VERTICAL 10 M” FALL ARRESTER SET: HAR12 + AN12010T + LO030200 + AM002
VERTICAL 10 M – Ready for use fall arrester kit: 2 fall arrester anchorage point harness (back – front). 2 adjustment loops. 2 adjustable side plates. (Ref. HAR12). Self retractable fall arrester with steel strap. Length 10 m. ABS case. 1 automatic swivel connector and fall indicator AM016 (Ref. AN12010T). Lanyard and anchorage point in tubular strap, length 2 m (Ref. LO030200). 2 connectors AM002.
Fall arrest harness: Polyester straps.
Lanyard: Polyamide.
Carter: Plastic.
Carabiner: Steel.
| Reference |
pcb |
Colour |
Size |
| ELARA270 |
1 |
Orange |
S/M/L |
EN363 : 2008 Personal fall protection equipment - Personal fall protection systems EN364 : 1992 Personal fall protection equipment : Test method EN365 : 2004 General requirements for the instructions for use and the marking EN361 : 2002 Personal protection equipment against falls from a height - Full body harnesses - Additional special requirements
EN360:2002 Personal protection equipment against falls from a height - Self-retractable fall arrester - VG 11.062
- Additional special requirements
- Intensive use
- Horizontal certification
Fall arrester with self- locking device and a self-retractable system for the lanyard.
An energy reducer (absorber) can be built-in in the equipment.
EN354 : 2010 Personal fall protection equipment - Lanyards. Connection elements or equipment component. A lanyard can be in rope made of synthetic fibres, in metallic rope, in strap or in chain. Maximum length: 2m.
CAUTION: A lanyard without energy absorber must not be used as a fall arrest equipment.
EN795:2012 Personal fall protection equipment : Anchorage devices - Anchorage device type A
- B Anchorage device type B
- Anchorage device type C
Element to which a personal protective equipment can be fastened. (Standard under development).
– TYPE A: Anchor device with one or more stationary anchor points with the need of a structural anchor.
– TYPE B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
– TYPE C: Anchor device employing an flexible anchor line with maximum deviation of 15°.
– TYPE D: Anchor device employing an rigid anchor line with maximum deviation of 15°.
– TYPE E: Anchor device for use on surfaces with a maximum slope of 5°.
EN362 : 2004 Personal protection equipment against falls from a height - Connectors
