» Products » Diamond v up

Diamond v up

Abs safety helmet "baseball cap" shape + chin attachment - rotor® adjustment





Performance -30°C and standard EN397:2012 effective from 03/2016 production batches.

The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :



ABS safety helmet with innovative design. Tested in “reverse” position. Polyamide cradle: 3 fabric bands with 8 attachment points. Terry sweatband. Rotor® clamping system (patented): head size 53 to 63 cm. 2 possible positions around the head (high/low) for better comfort. Retro-reflective band. Electrical insulation 1000 VAC/1500 VDC. Sold with 4 chin attachment points.

Performance -30°C and standard EN397:2012 effective from 03/2016 production batches.


  • Construction / Civil engineering
  • Heavy industry
  • Shock
  • ROTOR® patented system for easy use

    Retro-reflective tape.

    Polyamide cradle: 3 textile bands with 8 fixing points

    Reference pcb Colour Size
    DIAM5UPBCFL 20 White Adjustable
    DIAM5UPBLFL 20 Blue Adjustable
    DIAM5UPJAFL 20 Yellow Adjustable
    DIAM5UPROFL 20 Red Adjustable
  • EN397:2012 + A1:2012 Protective helmets for industry
    • MM Molten metal spray
    • LD Lateral deformation
    • Standard temperatures - -10°C / +50°C
    • Very low temperature - -20°C / +50°C
    • -30°C +50°C Very low temperature - -30°C / +50°C
    • Very high temperature - +150°C / -30°C
    • 440VAC Electric insulation
    Protective helmets for industry. MANDATORY – Impact*: force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height. The impact energy of the helmet at the end of the test is 49 J. – Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull. – Flammability: the helmet should not burn with flame emission more than 5 seconds after removal of the flame. * The impact and penetration tests are performed at room temperature, at 50°C and at -10°C OPTIONAL In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C or -30°C. Protects against lateral compression. The maximum deformation of the helmet should be ≤ 40 mm. Protects against accidental short-term contact with a live electrical conductor up to 440 VAC Resistance to molten metal splashes
  • EN50365:2002 Electrically insulating helmets for use on low voltage installations
    • 0 Casques électriquement isolants - Classe 0
    Electrical insulation helmets for use in low voltage environment. MANDATORY Electrically insulating helmets for use near energized equipment not exceeding 1000 VAC or 1500 VDC (appliance class 0). Used simultaneously with other electrically insulating protective equipment, these helmets prevent dangerous currents passing through to the person’s head. These optional electrical insulation tests are more stringent than the EN397 and they complement them. (2 triangle marking, Class 0).