The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :
FALL ARRESTER HARNESS WITH HIGH VISIBILITY VEST – 2 ANCHORAGE POINTS (BACK/FRONT)
Harness with high visibility vest not removable:
Harness (Ref. HAR12). Vest: Twill 54% polyester 46% cotton. Sewn retroreflective tape. Polyester mesh lining. Zip closure. 4 pockets including 1 phone pocket. Adjustable size by zip.
Straps: Polyester.
Vest: Polyester (Ref HAR12GILJA.) – Twill 54% polyester 46% cotton (Ref HAR12GILOR.).
28/09/15
| Reference |
pcb |
Colour |
Size |
| HAR12GILJAGT |
10 |
Fluorescent yellow |
S/M/L |
| HAR12GILJAXX |
10 |
Fluorescent yellow |
XL/XXL |
| HAR12GILORGT |
10 |
Fluorescent orange |
S/M/L |
| HAR12GILORXX |
10 |
Fluorescent orange |
XL/XXL |
EN361 : 2002 Personal protection equipment against falls from a height - Full body harnesses - 140 kg Additional special requirements
EN363 : 2008 Personal fall protection equipment - Personal fall protection systems EN364 : 1992 Personal fall protection equipment : Test method EN365 : 2004 General requirements for the instructions for use and the marking EN340:2003 General requirements Reference standard, not for use alone, but only in association with another standard containing the protection performance requirements.
This standard specifies general performance requirements for ergonomics, innocuousness, size designation, durability, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing.
EN471:2003 /A1:2007 High-visibility warning clothing for professional use - Test methods and requirements - 1 Class of clothing (1 to 3)
- Garment class (1 to 3) - Parka/Bodywarmer
- 2 Performance level of the retro-reflective material (1 to 2)
This standard specifies the requirements for protective clothing aiming to signal the presence of the wearer visually, so that he may be detected and seen in hazardous situations, in all conditions of daylight, and night under illumination of car headlights. There are three classes of high-visibility clothing. Each class must have minimum surfaces of visible material constituting the garment; the higher the class, the more visible the garment:
– CLASS 1:
Background material (Fluorescent): 0.14 m²
Retroreflective material (Bands): 0.10 m²
– CLASS 2 :
Background material (Fluorescent): 0.50 m²
Retroreflective material (Bands): 0.20 m²
– CLASS 3:
Background material (Fluorescent): 0.80 m²
Retroreflective material (Bands): 0.20 m²
Background material: Yellow, orange/red or red fluorescent material intended to be highly conspicuous.
Retroreflective material: Classified into 2 levels. The highest level of retroreflection gives the best contrast and visibility of high-visibility clothing seen in darkness, under headlamps.
Marking:
X : Class of high visibility surface (from 1 to 3)
X : Performance level of the retro-reflective material (1 to 2)
