Compliance with the essential requirements of Directive 89/686/EEC, in particular in terms of design, ergonomics and safety.
Meets with requirements and test standards EN363, EN364, EN365.EN354 and EN795:2012 where appropriate. Lanyard rope or strap: tensile strength> 22 kN.
Lanyard rope: breaking strength> 15 kN.Other components: Connector :Follow the instructions described in their own technical specifications.
WEBBING LANYARD AND ANCHORAGE POINT – 1,5 M
Lanyard and anchorage point in tubular strap. 2 sewn loops. Width 25 mm.
Polyamide
| Reference |
pcb |
Colour |
Size |
| LO031 |
15 |
Grey |
1.50 m |
EN363 : 2008 Personal fall protection equipment - Personal fall protection systems EN364 : 1992 Personal fall protection equipment : Test method EN365 : 2004 General requirements for the instructions for use and the marking EN795:2012 Personal fall protection equipment : Anchorage devices - Anchorage device type A
- B Anchorage device type B
- Anchorage device type C
Element to which a personal protective equipment can be fastened. (Standard under development).
– TYPE A: Anchor device with one or more stationary anchor points with the need of a structural anchor.
– TYPE B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
– TYPE C: Anchor device employing an flexible anchor line with maximum deviation of 15°.
– TYPE D: Anchor device employing an rigid anchor line with maximum deviation of 15°.
– TYPE E: Anchor device for use on surfaces with a maximum slope of 5°.
EN354 : 2010 Personal fall protection equipment - Lanyards. Connection elements or equipment component. A lanyard can be in rope made of synthetic fibres, in metallic rope, in strap or in chain. Maximum length: 2m.
CAUTION: A lanyard without energy absorber must not be used as a fall arrest equipment.
