The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :
49503
ANTI-VIBRATORY GLOVE
NYSOS VV904
100% Polyester. Palm and fingertips reinforced with Chloroprene rubber pads (0.8 cm thick). Neoprene back reinforcement. Gauge 7.
| Reference |
pcb |
Colour |
Size |
| VV904JA10 |
60 |
Yellow-Black |
10 |
| VV904JA11 |
60 |
Yellow-Black |
11 |
EN420:2003+A1:2009 General requirements - 1 Dexterity (from 1 to 5)
• Conform to harmlessness (pH, chrome VI levels, etc…).
• Conform to the size charts (see chart on below).
• Pass the dexterity test.
• Conform to the labelling, information and identification instructions.
EN388:2003 Protective gloves against mechanical Risks (Levels obtained on the palm) - 4 Resistance to abrasion (from 1 to 4)
- 1 Resistance to cutting (from 1 to 5)
- 4 Resistance to tear (from 1 to 4)
- 2 Resistance to puncture (1 to 4)
The EN388 standard applies to all types of protective gloves with respect to physical and mechanical aggression from abrasion, cutting from slicing, perforation and tearing.
ABRASION RESISTANCE (1 à 4): Number of cycles required to damage the sample at constant speed.
RESISTANCE TO CUTTING WITH A BLADE (1 à 5): Number of cycles required to cut the sample at constant speed.
RESISTANCE TO TEARING (1 à 4): Maximum force required to tear the sample.
RESISTANCE TO PERFORATION (1 à 4): Force required to pierce the sample with a standardized punch.
EN/ISO10819:2013 Vibrations and impacts of mechanical origin EN13594:2002 4.1.3/6.8.2. Impact energy attenuation Protection against impact in metacarpal area. After an energy impact of 5J, the force transmitted to the back of the hand cannot exceed 4 kN.
