» Products » Toutravo ve509

Toutravo ve509

 

Colour

Black

Size

6/77/88/99/1010/11

The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :

 

NEOPRENE GLOVE LENGTH 30 CM

Neoprene with cotton flocklining. Length: 30 cm. Thickness: 0,75 mm.

Tested according to EN374-3:2003 determination of permeation resistance, levels of permeation from 1 to 6 (A : Methanol = 3, B : Acetone = 3, C: Acetonitrile = 1, I: Ethyl Acetate = 3, J : n-Heptane = 2, 40% Caustic Soda (NaOH) (K) = 6/6, 96% Sulphuric Acid (L) = 4/6), Chrystallisabel acetic acid = 6, acetic acid 25% = 6, Aniline = 6, Dimethylformamide = 6, Ethanol = 6, Formaldehyde 37% = 6, Furfural = 6, Hydrochloric acid 10% = 6, Nitromethane = 6, Octyl alcohol = 6, Phenol = 6, Sodium hydroxide (20%) = 6)

100% neoprene
100% cotton flock lining

14/09/15

  • Construction / Civil engineering
  • Heavy industry
  • Light industry
  • Oil / Gas
  • Biological chemical particles
  • Wearing

    • Flocked lining :
    • Absorbs perspiration
    • Comfort

    NEOPRENE - UNSUPPORTED
    ADVANTAGE
    • Good abrasion resistance
    • Waterproof and airtight
    • Waterproof with alcohols and cleaners
    • Good heat resistance
    • Excellent protection against chemicals, greases and hydrocarbons

    Reference pcb Colour Size
    VE509NO06 120 Black 6/7
    VE509NO07 120 Black 7/8
    VE509NO08 120 Black 8/9
    VE509NO09 120 Black 9/10
    VE509NO10 120 Black 10/11
  • EN420:2003 General requirements
    • 5 Dexterity (from 1 to 5)
    • Conform to harmlessness (pH, chrome VI levels, etc…). • Conform to the size charts (see chart on below). • Pass the dexterity test. • Conform to the labelling, information and identification instructions.
  • EN388:2003 Protective gloves against mechanical Risks (Levels obtained on the palm)
    • 4 Resistance to abrasion (from 1 to 4)
    • 1 Resistance to cutting (from 1 to 5)
    • 1 Resistance to tear (from 1 to 4)
    • 0 Resistance to puncture (1 to 4)
    The EN388 standard applies to all types of protective gloves with respect to physical and mechanical aggression from abrasion, cutting from slicing, perforation and tearing. ABRASION RESISTANCE (1 à 4): Number of cycles required to damage the sample at constant speed. RESISTANCE TO CUTTING WITH A BLADE (1 à 5): Number of cycles required to cut the sample at constant speed. RESISTANCE TO TEARING (1 à 4): Maximum force required to tear the sample. RESISTANCE TO PERFORATION (1 à 4): Force required to pierce the sample with a standardized punch.
  • EN374-3:2003 Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
    • ABCIJKL Resistant gloves to permeation by chemicals, tested according to EN374-3
    • 3 > 60 mn Méthanol (A) CAS 67-56-1
    • 3 > 60 mn Acetone (B) CAS 67-64-1
    • 1 > 10 mn Acetonitrile (C) CAS 75-05-8
    • Dichloromethane (D) CAS 75-09-2
    • Carbon disulfide (E) CAS 75-15-0
    • Toluene (F) CAS 108-88-3
    • Diethylamine (G) CAS109-89-7
    • Tetrahydrofuran (H) CAS 109-99-9
    • 3 > 60 mn Ethyl acetate (I) CAS 141-78-6
    • 2 > 30 mn n-Heptane (J) CAS 142-85-5
    • 6 > 480 mn Caustic soda 40% (K) CAS 1310-73-2
    • 4 > 120 mn Sulphuric acid 96 % (L ) CAS 7664-93-9
    Permeation (tested as per standard EN374-3): Process by which a chemical product diffuses through the material of a protective glove, at the molecular scale. A glove is considered resistant to chemical products if it obtains a performance index to permeation at least equal to 2 for three test chemical products included in the following list of chemical products:

    Related products

    Nitrex ve802

    Venicut42gr

    Venicut44g3

    Dpve727

    Borok vv903

    Dpve716

    Nitrex ve801

    Pm159