The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :
VENTILATED BACK NITRILE GLOVE / 6-CM CLOTH CUFF
Nitrile on cotton jersey lining. 6-cm canvas safety cuff. Ventilated back.
Glove : 100% nitrile-coated and vulcanized (latex acrylonitrile butadiene).
Cotton jersey lining.
Cuff : canvas safety
03/09/15
Nitrile on jersey lining:
• Few sensibility to heat
• Excellent performances in oily and greasy environments
Jersey cotton lining with ventilated back :
• Comfort
• Better breathability
6-cm safety cuff:
• Clothes protection
• Easier to put on and take off
| Reference |
pcb |
Colour |
Size |
| NI17010 |
120 |
Blue |
10 |
EN420:2003 General requirements - 5 Dexterity (from 1 to 5)
• Conform to harmlessness (pH, chrome VI levels, etc…).
• Conform to the size charts (see chart on below).
• Pass the dexterity test.
• Conform to the labelling, information and identification instructions.
EN388:2003 Protective gloves against mechanical Risks (Levels obtained on the palm) - 4 Resistance to abrasion (from 1 to 4)
- 1 Resistance to cutting (from 1 to 5)
- 1 Resistance to tear (from 1 to 4)
- 1 Resistance to puncture (1 to 4)
The EN388 standard applies to all types of protective gloves with respect to physical and mechanical aggression from abrasion, cutting from slicing, perforation and tearing.
ABRASION RESISTANCE (1 à 4): Number of cycles required to damage the sample at constant speed.
RESISTANCE TO CUTTING WITH A BLADE (1 à 5): Number of cycles required to cut the sample at constant speed.
RESISTANCE TO TEARING (1 à 4): Maximum force required to tear the sample.
RESISTANCE TO PERFORATION (1 à 4): Force required to pierce the sample with a standardized punch.
