“SERVICES” FALL ARRESTER SET : HAR24 + AN060 + AN315 + EX021 + 2 AM002 + LV102100 + HA200
ELARA350
SERVICES – ready for use fall arrest kit: Harness with extensible “Riplight System II®” patented waves with positioning belt. 2 fall arrester anchorage points (back – front). 4 adjustable buckles. Positioning belt with thermoformed back closed with wide Velcro. 120° rotation. 2 lateral anchorage points for work positioning (ref. HAR24). Fall arrester sliding on anchorage line stranded rope Ø 14 mm, opening type, equipped with automatic locking, non-inverting device, energy absorber with fall indicator (ref. AN060). Anchorage line stranded rope Ø 14 mm (ref. AN315). Adjustable work positionning lanyard via reducer. Adjustable length. Stranded rope Ø 12 mm. Protective sheath on the splices (ref. EX021). Anchorage ring with high tenacity polyester strap. Width 45 mm. End loop with shrinkage and steel anchor D (ref. LV102100). 1 tool holder (ref. HA200). 2 carabiners AM002.
Fall arrest harness with positioning belt. Polyester straps.
Fall protection slide on supporting belay: Galvanized steel. Polyamide rope.
Carabiner: Steel.
| Reference |
pcb |
Colour |
Size |
| ELARA350GT |
3 |
Black-Orange |
S/M/L |
| ELARA350XX |
3 |
Black-Orange |
XL/XXL |
EN363 : 2008 Personal fall protection equipment - Personal fall protection systems EN364 : 1992 Personal fall protection equipment : Test method EN365 : 2004 General requirements for the instructions for use and the marking EN353-2 : 2002 Personal protection equipment against falls from a height - Part 2 : Guided type fall arresters on a flexible anchor line. Equipment consisting of a mobile fall arrester with self-locking, integral with its flexible anchorage line (rope, cable…).
An energy reducer (absorber) can be built-in in the equipment.
EN361 : 2002 Personal protection equipment against falls from a height - Full body harnesses - Additional special requirements
EN358 : 1999 Personal fall protection equipment for work positioning and prevention of falls from a hight - Belts for work positioning and restraint and work positioning lanyards. - Additional special requirements
EN795:2012 Personal fall protection equipment : Anchorage devices - Anchorage device type A
- B Anchorage device type B
- Anchorage device type C
Element to which a personal protective equipment can be fastened. (Standard under development).
– TYPE A: Anchor device with one or more stationary anchor points with the need of a structural anchor.
– TYPE B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
– TYPE C: Anchor device employing an flexible anchor line with maximum deviation of 15°.
– TYPE D: Anchor device employing an rigid anchor line with maximum deviation of 15°.
– TYPE E: Anchor device for use on surfaces with a maximum slope of 5°.
EN362 : 2004 Personal protection equipment against falls from a height - Connectors
