» Products » Mallow

Mallow

Pvc-coated ripstop polyester parka

Colour

Black

Size

SMLXLXXL3XL

The product complies with the European Directive 89/686, notably regarding ergonomics, innocuousness, comfort and with standards :

PVC-COATED RIPSTOP POLYESTER PARKA

Parka. Waterproof seams. Fastened with a zip under the storm flap with press studs. Adjustable waist with elastic drawstring. 5 pockets.

PVC-coated Ripstop polyester fabric.
Top lining : Wadded polyester polar fleece.
Bottom lining : Wadded polyester Taffeta.

15/02/16

  • Construction / Civil engineering
  • Light industry
  • Second work / craftsman
  • Services / Logistics
  • Cold / Weather
  • Removable hood

    Decorative reflective piping
    (front and back)

    Rear vent for embroidery access

    Fixed badge holder included

    Reference pcb Colour Size
    MALLONOPT 10 Black S
    MALLONOTM 10 Black M
    MALLONOGT 10 Black L
    MALLONOXG 10 Black XL
    MALLONOXX 10 Black XXL
    MALLONO3X 10 Black 3XL
  • EN340:2003 General requirements
  • Reference standard, not for use alone, but only in association with another standard containing the protection performance requirements. This standard specifies general performance requirements for ergonomics, innocuousness, size designation, durability, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing.
  • EN14058:2004 Protective garment against cool environments
    • 3 Thermal resistance of garment Class (1 to 3)
    • Thermal resistance of garment Class (1 to 3) - Parka
    • 3 Air permeability Class (1 to 3)
    • X Class of resistance to water penetration (from 1 to 2)
    • X Resultant effective thermal insulation measured on a mobile model
    • X Resultant effective thermal insulation measured on a stationary model
    This standard specifies the requirements and performance test methods for protective garments (vests, jackets, coats, trousers) against cool environments. These garments are for use in moderate low temperatures (-5°C and over) to protect against local body cooling and are not only for outdoor use such as in the construction industry, but may also be used for indoor activities, such as in the food processing industry. These garments are not always necessarily made of air impermeable or watertight materials. Therefore, in this European standard, these requirements are optional.
  • EN343:2003 A1:2007 Protective garment against rain exposures
    • 3 Resistance of the Penetration of water (1 to 3)
    • Resistance of the Penetration of water (1 to 3) - Parka
    • 1* Evaporative resistance (1 to 3)
    This standard specifies the requirements and test methods applicable to the materials and seams of protective clothing against foul weather (for example precipitation in the form of rain or snow), fog and ground humidity. • THERMAL RESISTANCE (Rct) IN M².K/W : Measurement of the thermal insulation provided. Divided into 3 classes (from 1 to 3) from the least insulating to the most insulating. The higher the value, the greater the thermal insulation. • WATER VAPOUR RESISTANCE (Ret) IN (M².PA)/W : Measures the evaporative resistance, i.e. the product’s obstacle to the passage of water vapour, or the barrier it offers to evaporation of transpiration on the surface of the skin. The higher a product’s water vapour resistance, the greater this product’s barrier to the passage of water vapour: A breathing product has a low water vapour resistance. Divided into 3 classes (from 1 to 3) from the least breathable to the most breathable. • AIR PERMEABILITY (AP) IN mm/s : Determines the complex’s permeability to air. Divided into 3 classes (from 1 to 3) from the least airtight to the most airtight. • RESISTANCE TO WATER PENETRATION (WP) IN PASCAL: Measurement of the outer material and seams’ resistance to water penetration under a water pressure of (980+/-50) Pa/min. Divided into 3 levels (1 to 3) from the least impermeable to the most impermeable. • RESULTANT EFFECTIVE THERMAL INSULATION: Measured on moving dummy (/cler) or on non moving dummy (/cle). The thermal insulation coefficient, expressed in m2.K/W, is used to determine the optimum usage temperature of the garment in relation to the individual’s activity and his exposure time. Thermal insulation is measured with undergarments of type : – (B) for ensembles (Undershirt with long sleeves, long underpants, socks, bootee + thermojacket, thermopants, knitted gloves, balaclava). – (R) for garments (Undershirt with long sleeves, long underpants, socks, bootees, jacket, trousers, shirt, knitted gloves, balaclava). – (C) provided by the manufacturer.